Effective water treatment processes required to remove byproducts from pools

New strategies needed to remove byproducts from swimming pools.

Update: 2019-07-01 06:32 GMT

Washington: Researchers have observed that new strategies are necessary to effectively remove disinfection byproducts (DBPs) from swimming pools. A swimming session is the most opted choice for people to cool off during summers. However, when chlorine in the water reacts with human sweat, urine or dirt, the experience isn't too refreshing.

Now, researchers compared the effectiveness of different water treatment processes and found the need for new strategies to remove byproducts from pools. Chlorine is usually added to pool water to kill harmful microbes. However, this disinfectant can react with substances in the pool, many of which are introduced by swimmers themselves to form DBPs, which can irritate the eyes, skin, and lungs, according to a study published in the Journal of Environmental Science & Technology.

Most pool systems continuously recirculate water through various treatment steps to both disinfect the water and reduce DBPs and their precursors. But because of the difficulty of comparing swimming pools with different conditions, such as the number of swimmers, chlorine dosing or filling-water quality, scientists don’t currently know which strategy is the best.

So, Bertram Skibinski, Wolfgang Uhl, and colleagues wanted to compare several water treatment strategies under the controlled and reproducible conditions of a pilot-scale swimming pool system.

The researchers continuously added compounds to their model swimming pool that simulated dirt and body fluids and added chlorine according to regulations for full-scale pools. Then, they treated the water with one of seven water treatment strategies.

They found that the treatment using coagulation and sand filtration combined with granular activated carbon filtration was the most effective at lowering DBP concentrations. But even this treatment did not completely remove the contaminants because new DBPs were made more quickly than the old ones could be removed.

When UV irradiation was used as a treatment step, the levels of some DBPs increased because the UV light elevated the reactivity of organic matter toward chlorine. New strategies need to be explored to more effectively remove DBPs and prevent new ones from forming, the researchers said.

Similar News